Z-Silver

Z-Silver Connector

Z-Silver Elastomeric Connectors provide low resistance connections in many component-to-board and board-to-board applications.

Z-Silver Elastomeric Connectors are typically used to mate Flex Circuits or PC Boards to LCD Modules, EL Displays, LED Backlights and other PC Boards. Due to the silicone construction of Z-Silver Elastomeric Connectors, they conform to the contact surfaces of the mating substrates to create a gasket-like seal that withstands environmental conditions. In addition, the elasticity of Z-Silver Elastomeric Connectors provides superior performance in applications that require resilience to shock and vibration.

These low-cost connectors are available in custom sizes to accommodate the specific needs of your application.

Available Comibinations

Foam, solid silicone, and insulation are all available in any combination and on one or both sides of a Z-Silver Elastomeric Connector.

Z-SILVER LCD CONNECTOR WITHOUT INSULATION

Z-SILVER LCD CONNECTOR WITH FOAM PADDING OR SOLID SILICONE

Z-SILVER LCD CONNECTOR WITH INSULATION

Dimensions

Dimensions:

HEIGHT

Inches: .040 +/- .003 to .500 +/- .010
mm: 1.0 +/- 0.08 to 12.7 +/- 0.25

WIDTH
Inches: .020 +/- .002 to .100 +/- .006
mm: 0.51 +/- 0.05 to 2.54 +/- 0.15

LENGTH
Inches: .035 +/- .005 to 2 +/- .010 to 8 +/- .020
mm: 0.89 +/- 0.125 to 50 +/- 0.25 to 203 +/- 0.5

Recommended Height/Width ratio is 1.5:1 to 5:1

Nominal Specifications:

CONDUCTIVE LAYERS

100 per inch 39.37 per cm
200 per inch 98.43 per cm

LAYER THICKNESS

.005" 0.127mm
.0025" 0.064mm

Deflection: 5 – 20%
Clamping Force Per Linear Inch: 7DW (lbs.)

Typical Properties

Contact Resistance: 0.1 Ohms
Current Carrying Capacity: 1A
Resistance Between Conductor Layers: 10*E12 Ohm - min.
Dielectric Constant: 2.8
Temperature Range: Standard: -40 to 125 degrees C Low Temp: -65 to 125 degrees C
Humidity Range: 0 to 100% non-condensing
Layer Durometer: Conductive: 60 Shore A Non Conductive: 50 Shore A